|Track & Trace Solutions
At LYNX-CAPA TE folding boxes are sealed with tamper-proof labels.
Depending on the configuration different features are available – from labeling and printing to various inspections.
The station is designed to be operated from the front without the need to walk around it. In combination with LYNX-CAPA MV the station guarantees that the print on the folding box isn’t smeared by the label. Even at the highest machine speed the time for the ink to dry (0.7 s*) is ensured.
Tool-free adjustment to individual folding box size is possible.
Digital position indicators enable reproducible settings.
Another sensor monitors the good product lane for eject recognition and to detect congestion. When integrated into an existing line linkage to the machines before and after is possible.
Labeling from the side is implemented by default. The labeler HERMA 400 labels with a placement precision of 0.5 mm. Labeling is applicable for all common closing patterns and can be adjusted tool-free.
Labels can also be placed on top, e.g. Bollini.
The station can be equipped with two label storages if desired. Change of label roll is possible during ongoing operation in a short amount of time.
The use of clear fluorescent labels is implemented by default.
Units of up to 300 g are ejected via compressed air.
For heavier units or fragile objects an ejection turnout is used which pushes faulty units on a conveyer. Thus they are protected against impacts and falling.
Leangth = 60-220 mm, Width = 15-220 mm, Height = 20-120 mm
Larger boxes possible on request.
300 folding boxes per minute with a transport interval of 50 mm can be processed.
A,B = minimum 15 x 15 mm, maximum 50 x 40 mm
Area of ApplicationApplicable Objects:
- Folding boxes
- Presence of labels
- Position of labels
- Print (1D and 2D codes as well as plain text)
At LYNX-CAPA TE folding boxes are sealed with tamperproof labels. Depending on configuration level either sensors inspect the presence of labels or cameras and LYNX-SIGNUM HR inspect the label position.Thanks to its modular design the system can be equipped with a wide range of functions and be upgraded easily.
The drive is realised with brushless and, consequently, wear-free motors. The utilisation of planetary gear enables optimal power transmission. The complete housing consists of stainless steel. All components are standardized parts which guarantees an efficient supply of spare parts.
- Inspection of Label Position
Cameras and LYNX-SIGNUM HR can be integrated to inspect the precise position of labels on folding boxes.
- Ejection Turnout
This special construction is used to eject heavy or fragile units. It protects against impacts and falling.
- Labeling from the Top
The design of LYNX-CAPA TE enables the integration of an additional labeler to also place labels on folding boxes from the top, e. g. Bollini.
- Label Storage
Change of label roll is possible during ongoing operation. The label storage is an ideal option to prevent machine stops while changing the label roll especially at lines with high capacity.
- Label Print and Print Control
LYNX-CAPA TE can not only place printed and non-printed labels on folding boxes. It is also possible to insert a printer that prints codes and plain texts on labels and with LYNX-SIGNUM HR these prints can be checked.
The integration of scanware’s line manager LYNX-IMPERA enables to process serialized and aggregated data.
- Modular design allows a wide range of functions and solutions
- Easy to upgrade
- Tool-free adjustment to folding box size
- Applicable for all common closing patterns
- High precision of labels thanks to precise folding box guidance and ideal use of sensors
- Change of label roll is possible during ongoing operation
- Supports serialization
- Operation possible from the front
- Movable, robust and ergonomic design
- High-quality standardized parts allow an efficient supply of spare parts
Combined Solution LYNX-CAPA MV + TELYNX-CAPA TE is the ideal solution to retrofit existing Mark & Verify solutions.
The station is suitable for scanware’s LYNX-CAPA MV as well as for systems from other suppliers.
Both stations can be placed side by side or arranged in an angle. In the latter case a conveyer belt is installed to connect them with each other. This makes both stations an optimum solution to be integrated into any existing production line.The processing and aggregation of serialised data is handled by scanware's line manager LYNX-IMPERA.
In combination with LYNX-CAPA MV LYNX-CAPA TE is operated through the user interface of the Mark & Verify station.
Visualization takes place on the scanware GUI. Its uniform structure makes it easy to operate.
Printing of folding boxes takes place on LYNX-CAPA MV. It is precise due to folding box guidance from both sides. Printers by Wolke, REA, Bluhm and Domino can be installed. Other printers, e.g. DoD can be implemented upon request.
The product sensor triggers printer, camera shot, ejection and length measurement of the box. Another sensor monitors the good product lane for eject recognition and to detect congestion.